JY 4 x 1600 decoil, slitting and recoiling line

4x1600 slitting line is to slit metal coils of max 1600mm width and 0.3-4.0mm thickness.

4x1600 slitting line is to slit metal coils of max 1600mm width and 0.3-4.0mm thickness.

 The main composition: coil loading car, decoiler, coil head guide and shoveler, pinch-feeder and leveler, Hole accumulator(1), side guide, disc shearer, scrap reeler, hole accumulator(2), tensioner and pre-separator, separator and recoiler, and discharging car.

With continuous layout of whole line and solid structure of each unit, the slitting line can precisely and automatically slit coil and recoil sub coils.

Coil loading car: 2.2KW cycloid motor x 1500mm distance travel, Φ180 x 700 hydraulic cylinder for 20T

Single-mandrel decoiler: Φ160×100mm expansive cylinder, Φ125×200mm for moving cylinder

  mandrel diameter 508mm with rubber sleeve to adapt to coils' inner diameter

Coil guide and shovel: 2.2KW traction motor, traction wheel Φ250×400mm, shovel cylinders: up-down Φ80×400mm, back-forward Φ63×400mm.

pinch-feeder: 5.5kw cycloid motor for pinch-feeding and leveling, Φ160 x 1650 pinch feeding roller

Side guide: Φ90 x 125 vertical roller, three pairs, press roller Φ100 x 1700mm, adjust range: 300-1500mm

Disc shear: D330×d220×T10mm

Disc knife material: 6CrW2Si, HRC 58-60

Slitting motor: DC 110KW

Slitting speed: max 120m/min, adjustable

Scrap reeler: Φ450 x 350 creel diameter, 4kw x 2 motors

Strips separating disc: D200×d95 x 3mm

Length measuring roller: Φ320×1700mm, NRC rubber cover

Recoiling block: diameter 508mm

Recoiling motor: DC 132KW

Coil discharging car: 3KW motor and Φ180 x 700 hydraulic cylinder

Hydraulic station: 7.5KW-4, 450L oil volume

JY 4 x 1600 decoil, slitting and recoiling line